Product Status Current Model Number: SR42UB1032
42U SmartRack Standard-Depth Rack Enclosure Cabinet, Threaded 10-32 Mounting Holes with doors & side panels
Your product is still covered under warranty if it was purchased after 1/28/2018.
Create a Support Ticket
Register your product
Purchase a replacement
Documents & Downloads
One or more views of this model are included in the following Visio stencil.
We offer a number of free stencils to help with datacenter planning. For a complete list of stencils together with installation instructions, please see the Visio Stencils for Data Center Planning page.
Product Warranty Period (Worldwide)
5-YEAR LIMITED WARRANTY
Eaton Tripp Lite warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Eaton Tripp Lite will, subject to the foregoing terms and limitations, repair or replace the product, in its sole discretion, as your exclusive remedy for Eaton Tripp Lite's breach of its limited warranty.
Product RegistrationRegister your SR42UB1032
Eaton Tripp Lite's Return Policy
Proof of Warranty Coverage
You must provide proof that the product is covered under warranty. This can be confirmed by the product's serial number or with proof of purchase in the form of an invoice or receipt from an Eaton Tripp Lite authorized dealer. If required, please include the proof of purchase invoice with your return. Warranties on Eaton Tripp Lite products begin on the date of your product purchase. Warranty coverage varies by product line. Specific warranty duration is outlined in the owner's manual that accompanies each unit.
You are responsible for all transportation, insurance, duties and other similar charges for returned products. Please use caution; shipping damages resulting from improper packaging will be your responsibility. We recommend using a reliable parcel or freight carrier who is capable of providing tracking information and proof of delivery. The proof of purchase, if required, and your RMA number must be inserted in the shipping carton before the carton is sealed.
Repair or Replacement
Eaton Tripp Lite will repair or replace the product at Eaton Tripp Lite's option and ship the repaired or replaced product back to you at no charge.
Products not accompanied by a valid RMA number will not be accepted. The RMA number must be enclosed with your product or be clearly visible on the outside of the packaging.
Request Return Authorization (RMA)
A Return Merchandise Authorization (RMA) number is required for all products returned to Eaton Tripp Lite for replacement under warranty. You should first consult with Eaton Tripp Lite Customer Service (for returns within North America) or International Service (for returns outside of North America) before requesting an RMA number to eliminate any unnecessary returns. You can start the process by clicking on the contact technical support button below. Once eligibility has been determined, the RMA number along with shipping instructions will be emailed to you. RMA numbers are valid for 14 days from the date of issuance. Products will only be accepted for return if a valid RMA number is clearly marked on the outside of the package. Eaton Tripp Lite does not accept product returns that are not under warranty. If you bought the wrong Eaton Tripp Lite product and want to return it, please do so at the place of purchase. Returns will be authorized in accordance with the following policies.
Questions & Answers
Parts & Accessories
|SRBOLTDOWN||SmartRack Bolt-Down Kit - Secures stabilizing brackets or plates to facility floor|
|SRCASTERHDKIT||SmartRack Heavy-Duty Rolling Caster Kit, 4 pack|
|SRCOMBO||SmartRack Door Handles with Combination Lock with Bypass Key, 2-pack for Front and Rear Doors|
|SREXTENDER||SmartRack Rack Enclosure Extension Frame - Increases rack external & maximum mounting Deep|
|SRPAGODAROOF||SmartRack Drip Resistant Roof|
|SRSHELF2P||SmartRack 2U Cantilever Fixed Shelf (60 lbs / 27.2 kgs capacity; 18-in. / 457 mm Deep)|
|SRSHELF4PHD||SmartRack Heavy-Duty Fixed Shelf (250 lbs / 113.4 kgs capacity; 26 in/660 mm Deep)|
|SRSHELF4PKYBD||SmartRack Keyboard Shelf (25 lbs / 11.3 kgs capacity; 16 in / 406 mm Deep)|
|SRSHELF4PSL||SmartRack Standard Sliding Shelf (50 lbs / 22.7 kgs capacity; 28.3 in/719 mm Deep)|
|SRSHELF4PSLHD||SmartRack Heavy-Duty Sliding Shelf (200 lbs / 90.7 kgs capacity; 28.3 in/719 mm Deep)|
|SRSTABILIZE||SmartRack Anti-Tip Stabilizing Plate Kit - Provides extra stability for standalone enclosures|
|SRTHERMDUCT||SmartRack Thermal Duct Kit for SmartRack Enclosures|
|SRVRTBAR||SmartRack 42U Vertical Cable Management Bars|
Server Rack Cooling
|SRFAN3U||SmartRack 3U Fan Panel - 3-120V high-performance fans; 210 CFM; 5-15P plug|
|SRXFAN3U||SmartRack 3U Fan Panel - 3 208-240V high-performance fans; 315 CFM; C14 inlet|
|SRCABLEDUCT1U||SmartRack 1U Horizontal Cable Manager - Finger duct with cover|
|SRCABLEDUCTVRT||SmartRack 6 ft. (1.83 m) Vertical Cable Manager - Double finger duct with cover & toolless mounting|
|SRCABLELADDER||SmartRack 10-ft. x 1-ft. (3 m x 0.3 m) Cable Ladder, 2 sections - SRCABLETRAY/SRLADDERATTACH needed|
|SRCABLERING1U||SmartRack 1U Horizontal Cable Manager - Flexible ring type|
|SRCABLERING2U||SmartRack 2U Horizontal Cable Manager - Flexible ring type|
|SRCABLERINGVRT||SmartRack 6 ft. (1.83 m) Vertical Cable Manager - Flexible ring type & toolless mounting|
|SRCABLETRAY||SmartRack Roof-Mounted Cable Trough - Provides cable routing and power/data cable segregation|
|SRCABLETRAYEXP||SmartRack Roof-Mounted Cable Trough Vertical Expansion Plates - Requires SRCABLETRAY|