Product Status Discontinued on 12/28/2020 Model Number: B095-003-1E-M

3-Port Console Server with USB Port - Built-In Modem, GbE NIC, 2 Gb Flash, Desktop, TAA

B095-003-1E-M front view large image | Console Servers

Warranty

Your product is still covered under warranty if it was purchased after 4/5/2021.

4-year limited warranty

Create a Support Ticket

Owner's manuals

Quick Start Guide for B095-003-1E-M & B095-004-1E Console Servers

Owner's Manual for Console Servers (English)

Quick Start Guide for SDT Connector

Support resources

Software, Firmware & Drivers

Replaced by

B093-004-2E4U

Documents & Downloads

Documentation

Software, Firmware & Drivers

Design Resources

One or more views of this model are included in the following Visio stencil.

We offer a number of free stencils to help with datacenter planning. For a complete list of stencils together with installation instructions, please see the Visio Stencils for Data Center Planning page.

Product Warranty

Product Warranty Period (Worldwide)

4-YEAR LIMITED WARRANTY

Eaton warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for 4 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Eaton will, subject to the foregoing terms and limitations, repair or replace the product, in its sole discretion, as your exclusive remedy for Eaton's breach of its limited warranty.

Questions & Answers

How Can I Exit A Pmshell Session?

After establishing a pmshell session using their Tripp Lite Console Server, a user may exit a pmshell session to a port by typing "~." Users connecting using OpenSSH-based terminals (most Mac and Linux computers) will need to use two tildes "~~.". Note: If the tilde character is printing to the screen, the key may be getting held down too long. When this command is executed properly, the tilde and period characters will not print to the screen and the user will be returned to the Console Server prompt. Please see section 15.2.1 of the manual for more details on pmshell commands here For more details on pmshell commands, please see section 15.2.1 of the manual here.

Was this information helpful? Yes No

Need more help? Contact Technical Support

Why Can’t I Access My Serial Device On Port 1 Of My Tripp Lite Console Server, But I Can Access The Same Device On Other Ports?

By default, Port 1 is configured for Local Console Mode, which allows access to the terminal used to configure the console server. To allow general serial access to a connected device, set Port 1 to Console Server Mode. For more details on how to configure a Tripp Lite Console Server’s serial ports, please review Section 4.1 of the owners manual.

Was this information helpful? Yes No

Need more help? Contact Technical Support

How do I view a Tripp Lite Console Server's serial number remotely?

Tripp Lite B094 and B095 console servers with firmware version 3.11 and above can report their serial number remotely. As of this writing, B096 console servers do not report their serial number remotely. Please see below for two methods of obtaining a console server serial number remotely. Method 1: Web GUI 1) Access the console server using a web browser and an HTTPS connection (HTTP is disabled by default). 2) Click “Status: Support Report”. 3) Scroll down to the “Feature Set” section and the serial number will be listed if the console server supports this feature. Method 2: CLI 1) Access the console server’s CLI via any of the supported and enabled methods (Telnet, SSH, etc.). 2) Type “sudo showserial” and the console server will return the serial number or “No serial number information available” if the console server does not support this feature. Note: If logged in as the root user, omit “sudo” from the command.

Was this information helpful? Yes No

Need more help? Contact Technical Support

Ask a Question

Parts & Accessories

Copper Network Cables

Compare

	Model Number	Description
	N001-005-BK	Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE - Black, 5 ft. (1.52 m)
	N001-007-BK	Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE - Black, 7 ft. (2.13 m)
	N001-010-BK	Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE - Black, 10 ft. (3.05 m)
	N001-014-BK	Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE - Black, 14 ft. (4.27 m)
	N001-025-BK	Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE - Black, 25 ft. (7.62 m)
	N201-005-BK	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Black, 5 ft. (1.52 m)
	N201-007-BK	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Black, 7 ft. (2.13 m)
	N201-010-BK	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Black, 10 ft. (3.05 m)
	N201-014-BK	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Black, 14 ft. (4.27 m)
	N201-025-BK	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), PoE, Black, 25 ft. (7.62 m)

Network Adapters

Compare

	Model Number	Description
	B090-A9F	Modular Serial Adapter Straight-Through Wiring (DB9 F to RJ45 F)
	B090-A9F-X	Modular Serial Adapter Crossover Wiring (DB9 F to RJ45 F)
	B090-A9M	Modular Serial Adapter (DB9 M to RJ45 F)

* Name:
* Email:
Please type your question(s) here:
send email

* Name:
* Email:
Please type your question(s) here:
send email

* Name:
* Email:
Please type your question(s) here:
send email

Main	+1 773-869-1111
Fax	+1 (773) 869-1329

Product Status Discontinued on 12/28/2020 Model Number: B095-003-1E-M