Part Number: U339-004
This Model has been retired and replaced by U339-002. An Owner's Manual and other information for the U339-004 is available on the model support page
Cloning Functionality
The cloning function will not work if the U339-004 is connected to a computer or any other source via a USB cable.
Overview
The U339-004 4-Bay USB 3.2 Gen1/eSATA to SATA Docking Station connects up to four 2.5- or 3.5-inch SATA hard disk drives (HDD) or solid state drives (SSD) to an available USB or eSATA port on your laptop or computer. This lets you back up important data, retrieve data from an old hard drive, or store information on an external drive that you can take with you to another computer.
Not only can you quickly access hard drive content without time-consuming internal installation, you can also clone a drive to as many as three others simultaneously. Cloning does not require the U339-004 to be connected to a host computer. Just insert the master drive into the master bay, insert the slave drive(s) into the slave bay(s), and press the Clone button twice. Red LEDs monitor cloning progress. The U339-004 accepts 2.5- and 3.5-inch SATA III, II and I hard drives up to 6 TB and will work with larger drives as they become available.
This docking station supports USB 3.2 Gen1 data transfer rates up to 5 Gbps, as well as eSATA rates up to 6 Gbps. Its UASP (USB Attached SCSI Protocol) feature reduces latency and allows the cable to perform up to 70% faster when connected to a UASP-enabled host controller.
The U339-004 requires no software or drivers. It’s compatible with all USB- and/or eSATA-enabled operating systems and backward-compatible with previous USB generations.
Features
Connects Up to 4 SATA Drives to Your Computer’s USB or eSATA Port
- Recommended for backing up, retrieving and storing large data files
- Supports USB 3.2 Gen1 data transfer rates up to 5 Gbps
- Supports eSATA data transfer rates up to 6 Gbps
- Features UASP for performance up to 70% faster when connected to UASP-enabled host controller
Provides Offline Disk Cloning
- Duplicates a hard drive on up to 3 others simultaneously
- Offline cloning requires no computer connection
Compatible with 2.5 in. and 3.5 in. SATA HDDs and SSDs Up to 6 TB
- Accepts SATA III, SATA II and SATA I drives
- Backward-compatible with previous USB generations
- Will work with larger SATA drives as they become available
Easy to Use
- Plug-and-play—no software or drivers
- No time-consuming internal installation required
- Compatible with all USB- and/or eSATA-enabled operating systems
- USB 3.2 Gen1 and eSATA cables included
System Requirements
- Any USB- and/or eSATA-enabled operating system (cloning functionality will not work if the U339-004 is connected to a computer)
- Available USB or eSATA port (USB 3.2 Gen1 required to achieve USB 3.2 Gen1 speeds. SATA III eSATA port required to achieve eSATA speeds.)
- 2.5 in. or 3.5 in. SATA drive
- UASP-enabled host controller required for UASP performance
Package Includes
- U339-004 4-Bay USB 3.2 Gen1/eSATA to SATA Docking Station
- USB 3.2 Gen1 cable, 2.5 ft.
- eSATA cable, 2 ft.
- External power supply with NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 1.2A; Output: 12V, 5A)
- Owner's manual
Specifications
OVERVIEW
| UPC Code | 037332198709 |
| Technology | SATA/eSATA |
INPUT
| AC Power Adapter Plug(s) | NEMA 1-15P North America |
| AC Power Adapter Input Specs (V / Hz / A) | 100-240V / 50/60Hz / 1.5A |
| AC Power Adapter Output Specs (V / A) | 12V / 5A |
| AC Power Adapter Cord Length (ft.) | 4.9 |
| AC Power Adapter Cord Length (m) | 1.5 |
| Voltage Compatibility (VAC) | 100; 110; 120; 127; 200; 208; 220; 230; 240 |
POWER
| Power Source Type | AC Adapter with detachable power cord |
| AC Adapter | Input: 100-240V, 50/60Hz, 1.2A; Output: 12V, 5A |
| DC Barrel Plug | OD: 5.5 x 2.1 x 10mm, Positive Pin, Negative Sleeve |
| Power Consumption (Watts) | 60 |
CONNECTIONS
| Number of Ports | 4 |
| Side A - Connector 1 | 7 PIN ESATA (MALE); USB A (MALE) |
| Side B - Connector 1 | (4) 22 PIN SATA + POWER (FEMALE) |
| Connector Plating | Nickel |
USER INTERFACE, ALERTS & CONTROLS
| LED Indicators | Red (Read, Write, Power); Green (Clone) |
PHYSICAL
| Color | Black |
| Material of Construction | ABS, Steel |
| Shipping Dimensions (hwd / in.) | 2.80 x 6.70 x 9.60 |
| Shipping Weight (lbs.) | 2.40 |
| Unit Dimensions (hwd / in.) | 2.559 x 6.496 x 5.000 |
| Unit Packaging Type | Box |
| Unit Weight (lbs.) | 1 |
ENVIRONMENTAL
| Operating Temperature Range | 50° to 122°F (10° to 50°C) |
| Storage Temperature Range | 32° to 149°F (0° to 65°C) |
| Relative Humidity | 10% to 80% RH, Non-Condensing |
| BTUs | 204.7 BTU/Hr |
FEATURES & SPECIFICATIONS
| USB Specification | USB 3.2 Gen 1 (up to 5 Gbps) |
| UASP Support | Yes |
| Driver Required | No |
STANDARDS & COMPLIANCE
| External Power Supply Certifications | CE; FCC; UL; PSE; GS; RoHS; China RoHS |
| Product Compliance | RoHS; CE (Europe); REACH; FCC (USA) |
WARRANTY & SUPPORT
| Product Warranty Period (Worldwide) | 3-year limited warranty |
Questions & Answers
Documents & Downloads
Declarations of Conformity
Useful Web Pages
Product Images
