10000 Woodward Avenue
Woodridge, Illinois 60517
+1 773-869-1776
+1 (773) 869-1329
United States
Contact Us

1.44kW Single-Phase Local Metered PDU with ISOBAR Surge Protection, 120V, 3840 Joules, 16 NEMA 5-15R Outlets, L5-30P Input, 15 ft. Cord, 0U Vertical

Part Number:  PDUMV15-ISO New

Delivers 120V single-phase AC power to multiple loads while also protecting connected equipment from dangerous surges and spikes. 

  • Local metered PDU ideal for telecom, security, A/V and other small network applications
  • Digital ammeter for on-site load monitoring helps prevent power overloads
  • 3840 joules protect your valuable electronics against dangerous surges and spikes
  • 16 NEMA 5-15R outlets distribute AC power to connected equipment
  • Flexible installation options include 0U rack, under counter and on wall
  • 2-year limited warranty
Extended Warranty Options
Have a Question?
Contact Us


Single-Phase 120V PDU Distributes and Monitors Network-Grade Power to Multiple Loads
This local metered PDU is an ideal unit for telecom, security, audio/video and a wide variety of general portable and stationary rack-mount applications. Recommended for network-grade IT environments, the PDUMV15-ISO provides real-time monitoring of load levels via its built-in digital current metering. A 15-foot (4.6-meter) cord with L5-30P input plug connects to your facility’s AC power source, generator or protected UPS system to distribute power to connected loads.

Digital Load Meter Helps Prevent Potentially Expensive Overloads
The PDUMV15-ISO features 16 NEMA 5-15R outlets for delivering power to equipment. A digital ammeter reports the total input current in real time. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels can keep your TCO (total cost of ownership) low.

3840 Joules per Load Bank Fight Back Against Unexpected Power Surges
Protecting your valuable electronics is ISOBAR® network-grade AC surge and noise suppression. A 3840-joule surge protection rating defends your sensitive electronic components against even the strongest power surges, spikes and line noise. The PDUMV15-ISO covers full normal (H-N) and common (N-G/H-G) protection modes. A green LED confirms your connected equipment is protected.

Up-to-Date Safety Features Protect Your Vital Equipment
All outlets are protected by a resettable 15A circuit breaker that shuts down the PDU in the event of a power load to safeguard connected equipment. A transparent cover protects the lighted on/off switch to help prevent an accidental shutdown that could lead to costly downtime.

Versatile Installation Options Give You Plenty of Choices
The 0U PDU mounts vertically using the included hardware. Vertical 0U mounting reduces cable clutter and permits efficient airflow through the rack. You can also install the long-lasting all-metal housing on a wall, raceway or a similar flat surface.

Package Includes

  • PDUMV15-ISO 1.44kW 120V Single-Phase Local Metered PDU
  • Mounting hardware
  • Owner’s manual
RoHS compliant


UPC Code037332255860
PDU TypeLocal Metered
Input PhaseSingle-Phase
PDU Input Voltage120V
Recommended Electrical ServiceSingle-phase 15A 120V service
Maximum Input Amps12
Maximum Input Amps DetailsAgency de-rated to 12A continuous
PDU Plug TypeNEMA 5-15P
Input Cord Length (ft.)15
Output Capacity (kW)1.44
Output Capacity Details1.44kW (120V) / 12A total capacity; 12A max per outlet
Frequency Compatibility50 / 60 Hz
Output Receptacles(16) 5-15R
Output Nominal Voltage120V
Overload Protection15A circuit breaker
Front Panel LCD DisplayDigital meter reports PDU output current in amps
Front Panel LEDsSet of 3 diagnostic LEDs continuously report status for LINE OK (green), suppressor or wiring FAULT (red) and PROTECTION PRESENT (green)
SwitchesLighted on/off switch with transparent switch cover
AC Suppression Joule Rating  3840
AC Suppression Response Time  NM = 0 ns. CM = <1 ns
Clamping Voltage (RMS)  140
AC Suppression Surge Current Rating60,000 amps
EMI / RFI Filtering  40-80 dB
ImmunityConforms to IEEE 587 / ANSI C62.41
Material of ConstructionMetal
Form Factors SupportedVertical (0U) mounting in rack enclosures
PDU Form FactorVertical (0U)
Shipping Dimensions (hwd / in.)2.56 x 4.72 x 51.97
Shipping Weight (lbs.)6.57
Unit Dimensions (hwd / in.)48.430 x 1.500 x 3.140
Unit Weight (lbs.)4.940
Operating Temperature Range32° to 104°F (0° to 40°C)
Storage Temperature Range5° to 122°F (-15° to 50°C)
Relative Humidity5-95% Non-condensing
Operating Elevation (ft.)0-6562 above the sea level
Operating Elevation (m)0-2000 above the sea level
Product CertificationsCAN/CSA-C22.2 No. 269.3 (Canada); CAN/CSA-C22.2 No. 62368-1 (Canada); NOM (Mexico); RETIE (Colombia); UL 1363; UL 62368-1
Product ComplianceRoHS
Product Warranty Period (Worldwide)2-year limited warranty

Questions & Answers


Extended Warranty

Part Number Description
WEXT1B Extended Warranty and Technical Support for Select Products – DC Power, Keyspan, KVM, PDUs, Inverters, Power Management, UPS Systems
WEXT2B Extended Warranty and Technical Support for Select Products – DC Power Supplies, Keyspan Products, KVM Switches, PDUs, Power Inverters, Power Management, UPS Systems
WEXT3B Extended Warranty and Technical Support for Select Products – DC Power Supplies, Keyspan Products, KVM Switches, PDUs, Inverters, Power Management, UPS Systems

Need help with your purchase?
We're always available to help with questions, including product selection, sizing, installation and product customization. Call us at +1 773-869-1776 or email