42U SmartRack Mid-Depth Expansion Rack - side panels not included
Part Number: SR42UBMDEXP
- 42U SmartRack enclosure with doors and NO side panels. 'EXP' version is an expansion model for when several cabinets are bayed together
- 36" (927mm) depth (with mounting depth increments from 4 to 28.75") and standard 24" (600mm) width
- 4 interior vertical posts with unthreaded square hole openings
- Ships fully assembled
- Massive front to rear ventilation capacity
- 3000 lbs (1360.8 kgs) stationary / 2250 lbs (1020.6 kgs) rolling load capacity
- Locking, removable, reversible front and rear doors
- Rolls through standard 7-ft. (2.13 m) doorways
- 5-year limited warranty
Part of our new line of mid-depth racks, the SR42UBMDEXP is an expansion model with a depth of 36" (927mm) and width of 24" (600 mm). An expansion cabinet is ideal when several cabinets are bayed together. It has doors and a roof but no side panels. Its integrated baying tabs make it easy to combine multiple enclosures in rows fro data center application. The SR45UBMDEXP is also compatible with hot aisle/cold aisle configurations.
The SR42UBMDEXP houses 3000 lbs (1360.8 kgs) of standard 19-inch rack equipment in 42U. Offers vendor-neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19" equipment. Its front and rear pairs of vertical rails are adjustable in quarter-inch increments from 4 to 28.75 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference. Two of these adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.
The top panel of the SR42UBMDEXP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UBMDEXP is open-bottom.
All components of the SR42UBMDEXP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR42UBMDEXP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.
The SR42UBMDEXP comes with a 5-year product warranty. As part of the SmartRack family, the SR42UBMDEXP is compatible with Tripp Lite's extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement.
- Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)
- Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements.
- Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).
- Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
- Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
- Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
- Maximum usable internal depth of 31 inches/787 mm (front to rear frame).
- Weight ratings of 3000 lbs (1360.8 kgs) stationary and 2250 lbs (1020.6 kgs) rolling.
- Front door is locking, reversible and removable.
- Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer to a wall.
- Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles.
- Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.
- Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires.
- Open bottom for cable access.
- Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.
- Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack.
- Compatibility with airflow optimization accessories as well as cable management accessories.
|Device Compatibility||Patch Panel; Network Switch; UPS|
|Factory Preset Rack Depth (in.)||22.75|
|Maximum Device Depth (in.)||31|
|Minimum Device Depth (in.)||4|
|Shipping Dimensions (hwd / in.)||78.00 x 24.00 x 36.50|
|Shipping Weight (lbs.)||236.00|
|Unit Dimensions (hwd / in.)||78.500 x 23.630 x 36.000|
|Unit Weight (lbs.)||186|
|Weight Capacity - Rolling (lbs.)||2250|
|Weight Capacity - Stationary (lbs.)||3000|
|Number of Vertical Mounting Rails||4|
FEATURES & SPECIFICATIONS
|Grounding Lug||Front and Back door frames|
STANDARDS & COMPLIANCE
|Product Certifications||UL 60950-1|
|Product Compliance||RoHS; CE (Europe); UKCA|
WARRANTY & SUPPORT
|Product Warranty Period (Worldwide)||5-year limited warranty|
Questions & Answers
|4POSTRAILKIT1U||SmartRack 4-Post 1U Universal Adjustable Rack-Mount Shelf Kit|
|SRBOLTDOWN||SmartRack Bolt-Down Kit - Secures stabilizing brackets or plates to facility floor|
|SRCAGENUT5MM||SmartRack Square Hole Hardware Kit with 50 M5 screws and washers|
|SRCAGENUTS||SmartRack Square Hole Hardware Kit with 50 M6 screws and washers|
|SRCAGENUTS1224||SmartRack Square Hole Hardware Kit with 50 pcs 12-24 screws and washers|
|SRCASTERHDKIT||SmartRack Heavy-Duty Rolling Caster Kit, 4 pack|
|SRSCREWS||SmartRack Threaded Hole Hardware Kit - 50 each #12-24 screws|
|SRSHELF2P||SmartRack 2U Cantilever Fixed Shelf (60 lbs / 27.2 kgs capacity; 18-in. / 457 mm Deep)|
|SRSHELF2P1U||SmartRack 1U Cantilever Fixed Shelf (40 lbs / 18.1 kgs capacity; 12-in. / 305 mm Deep)|
|SRSHELF4PHD||SmartRack Heavy-Duty Fixed Shelf (250 lbs / 113.4 kgs capacity; 26 in/660 mm Deep)|
|SRSHELF4PKYBD||SmartRack Keyboard Shelf (25 lbs / 11.3 kgs capacity; 16 in / 406 mm Deep)|
|SRSHELF4PSL||SmartRack Standard Sliding Shelf (50 lbs / 22.7 kgs capacity; 28.3 in/719 mm Deep)|
|SRSHELF4PSLHD||SmartRack Heavy-Duty Sliding Shelf (200 lbs / 90.7 kgs capacity; 28.3 in/719 mm Deep)|
|SRSTABILIZE||SmartRack Anti-Tip Stabilizing Plate Kit - Provides extra stability for standalone enclosures|
|SRVRTBAR||SmartRack 42U Vertical Cable Management Bars|
Server Rack Cooling
|SRFAN3U||SmartRack 3U Fan Panel - 3-120V high-performance fans; 210 CFM; 5-15P plug|
|SRXFAN3U||SmartRack 3U Fan Panel - 3 208-240V high-performance fans; 315 CFM; C14 inlet|
|SRCABLEDUCT1U||SmartRack 1U Horizontal Cable Manager - Finger duct with cover|
|SRCABLEDUCT1UHD||SmartRack 1U High Capacity Horizontal Cable Manager - Finger duct with dual-hinge cover|
|SRCABLEDUCT2UHD||SmartRack 2U High Capacity Horizontal Cable Manager - Finger duct with dual-hinge cover|
|SRCABLEDUCTVRT||SmartRack 6 ft. (1.83 m) Vertical Cable Manager - Double finger duct with cover & toolless mounting|
|SRCABLERING1U||SmartRack 1U Horizontal Cable Manager - Flexible ring type|
|SRCABLERING2U||SmartRack 2U Horizontal Cable Manager - Flexible ring type|
|SRCABLERINGVRT||SmartRack 6 ft. (1.83 m) Vertical Cable Manager - Flexible ring type & toolless mounting|
|4POSTRAILKIT||4-Post Rack-Mount Installation Kit of select Rack-Mount UPS Systems|
|SR1UPANEL10||SmartRack 1U Blanking Panel Kit, Toolless-Mounting, 10 pieces|
|SR1UPANEL50||SmartRack 1U Blanking Panel Kit, Toolless-Mounting, 50 pieces|
|UPSHDEARKIT||Heavy-Duty 2-post Front Mounting Ear Kit|
Documents & Downloads
Declarations of Conformity